|
|
Home> Products |
 |
|
| |
KW-JL101
Full Automatic
Terminal Crimping Machine |
| |
Features
- KW-JL101 is fully automatic wiring harness process machine by computer control from touch panel including cutting length, stripping length, stripping depth, terminal crimping position and both end crimping process.
- This machine can be installed "Optical type wire feeding sensor" and "Terminal sensor system" makes process quality accurately.
- "Optical type wire feeding sensor" can detect wire stripping or not, makes crimping in stable quality (the sensor is optional accessory).
- This machine strip chip vacuum installed makes a workshop clean, cutting and stripping are separately to make stripping more stable.
| MODEL |
KW-JL101 |
| FUNCTION |
Measuring - Cutting - Both end stripping - Both end crimping - Auto-blade depth adjustment - Auto-crimping position adjustment - Auto-strip length adjustment - Half-strip on No.1 crimping - Step driving. Twisting (optional) |
| CAPACITY |
1 sec/pc (in case of min. wire length) |
| WIRE SIZE |
0.08 ~ 2.0mm2 (AWG#28 ~ #14) Max O.D. 34.mm |
| CUTTING LENGTH |
50 ~ 9,999mm - Min length varies depends on the stripping length and the type of terminal. |
| CUTTING ACCURACY |
Variation within 1mm (set length x 0.002) |
| STRIPPING LENGTH |
No. 1 side: 1.5 ~ 13mm (20mm w/o crimping, 35mm half-stripping), No. 2 side: 1.5 ~ 10mm |
| PRESS CAPACITY |
2 Ton x 2 |
| SENSOR |
Low air pressure - Crimping miss - Wire stripping miss - Abnormal action of wire reel stand |
| POWER SOURCE |
AC200V 50/60Hz |
| COMPRESSED AIR |
0.5Mpa (5kgf/cm2) approx. 200NL/min (use clean dry air) |
| DIMEMSION-WEIGHT |
1,140W x 670D x 1,400H (mm) - (approx. 450kg) |
| OPTIONAL PARTS |
Wire reel stand (bundle, reel) - Wire pre feeder - Paper winding unit - Optical type wire feeding sensor - Terminal presence/overload detector - Twisting |
|
KW-JL101 |
| |
|
|
| |
KW-MINIC-A
Full Automatic
Terminal Crimping Machine |
| |
Features
- This machine is special-use for thin wire, especially for AWG# 20
~ AWG# 30
- This machine can cut to constant length, stripping and crimping
terminal both ends of wire at high speed automatically.
- 5.7" LCD screen is applied as the main-machine for easy operation
and save time for adjustment.
| MODEL |
KW-MINIC-A |
| CAPACITY |
When (100mm), 3960 pcs / hr |
| WIRE SIZE |
AWG# 20 ~ AWG# 30 |
| CUTTING
LENGTH |
32 ~ 9999.9mm |
| STRIPPING
LENGTH |
1.5 ~ 12mm |
| PRESS CAPACITY |
1.5 Ton x 2 |
| CONTROL MODE |
Electronic. Electrical and Cams |
| DETECTOR |
Out of wire, Terminal overload, Mis-Crimping,
Mis-Stripping, Low
air pressure, Handle Position, Out of Wire, Wire overload (installed
pre-feeder) |
| AIR PRESSURE |
5 ~ 6 kgs |
| POWER SUPPLY |
One phase AC220V, 3A |
| WEIGHT |
470 kgs |
| DIMENSION |
1000 L x 820 W x 1810 H (mm) |
|
KW-MINIC-A |
| |
|
|
| |
KW-MINIC-S
Full Automatic Terminal Crimping Machine (With Twisting Machine) |
| |
Features
- Beside MINIC-A functions, MINIC-S is developed on cencept of both
ends crimping, single end twisting and single end crimping twist
machine and applicator are easy to setup and replacement.
| MODEL |
KW-MINIC-S |
| CAPACITY |
When (100mm), 3960 pcs / hr |
| WIRE SIZE |
AWG# 20 ~ AWG# 30 |
| CUTTING
LENGTH |
32 ~ 9999.9mm |
| STRIPPING
LENGTH |
1.5 ~ 12mm |
| PRESS CAPACITY |
1.5 Ton x 2 |
| CONTROL MODE |
Electronic. Electrical and Cams |
|
TWIST LENGTH |
1.5mm ~ 8mm |
| DETECTOR |
Out of wire, Terminal overload, Mis-Crimping, Mis-Stripping, Low
air pressure, Handle Position, Out of Wire, Wire overload (installed
pre-feeder) |
| AIR PRESSURE |
5 ~ 6 Kgs |
| POWER SUPPLY |
One phase AC220V, 3A |
| WEIGHT |
480 kgs |
| DIMENSION |
1000 L x 820 W x 1810 H (mm) |
|
KW-MINIC-S |
|
|
| Optional Accessories |
 |
 |
 |
| Wire Pre-feeder
Straightening Machine -
KW-200B |
Twisting Machine -
KW-SMART |
Paper Winder -
KW-PRA |
|
[ Page 1 ] [ Page 2 ] [ Page 3 ]
|
