Home> Products

 

  [ Page 1 ]  [ Page 2 ]  [ Page 3 ]
 

  KW-JL-PRO-A
 

Functions

  • Setting for wire length.
  • Both side stripping.
  • Both side crimping.
  • Full stripping.
  • Half Stripping.
  • Rear side twisting (optional).
 MODEL KW-JL-PRO-A
 Capacity When 100mm, 4,200pcs/hr. according to processing process
 Wire Size Awg#28~#16
 Cutting length 50~9,999mm (Min. PVC length 38mm, according to terminal type)
 Cutting Accuracy 0.02%
 Stripping length NO.1 : 0.1~15mm / NO.2 : 0.1~10mm
 Press Capacity 3 Ton x 2
 Detector - Empty terminal
- Empty wire
- Crimping excessively tight
- Crimping monitor
- Pre-wire feeding simultaneously
 Power Source AC200V 50/60hz
 Compressed Air 0.5Mpa(5kgf/cm2) approx.200ML/min (use clear air)
 Dimension-Weight 1340mm(L)x1040mm(W)x1480mm(H) , approx. 450kgs (N.W.)



KW-JL-PRO-A

     

  KW-JL-PRO-SSH
Fully automatic wiring harness process machine
 

Features

  • Fully automatic wiring harness process machine by computer contril from touch panel including cutting length, stripping length, stripping depth, terminal crimping position and one side crimping other side twisting and tin dipping process.
  • Crimping machine is driven by Servo motor directly powerful torsion, slight vibration, coefficient of losses for parts is reduced.
  • Wire movement is driven by track servo-motor type, fix position more accurately.
  • This machine can be installed "Optical type wire feeding sensor" and "Terminal sensor system" makes process quality accurately.
  • Wire twist is made possible by three rotary claws driven; adjustable rotation speeds keep wire straight and neat.
  • Dipping welding flux and tin dipping depth can be adjusted, accurately process quality by twin-cups design.
  • Setting twin-tin cups fluctuation and times for scraping tin chips are available.
  • The temperature setting of tin stove can be adjusted.

Functions

  • Setting for wire length.
  • One side stripping.
  • One side crimping.
  • Rear twisting.
  • Tin dipping.
  • Full stripping.
  • Half stripping.
 MODEL KW-JL-PRO-SSH
 Capacity When 100mm, 3,600pcs/hr. according to processing process
 Wire Size Awg#28~#16
 Cutting length 35~9,999mm (min. PVC legth 19mm, according to terminal type)
 Cutting Accuracy 0.02%
 Stripping length Front end 0.1~15mm, rear end 0.1~15mm
 Press Capacity 3 Ton
 Control Mode 2.5mm~12mm
 Twist Length Yes
 Solder 350W
 Detector - Empty terminal
- Crimping excessively tight
- Crimping monitor
- Wire pre-feeding simultaneously
- Tin stove temperature abnormal
- Empty wire
 Power Source AC200V 50/60hz
 Compressed Air 0.5Mpa(5kgf/cm2) approx.200ML/min (use clear air)
 Weight 420kgs
 Dimension-Weight 1340mm(L)x1040mm(W)x1480mm(H)



KW-JL-PRO-SSH

     

  KW-MINIC-SSH
Multi-functions for smaller wire processing
 

Features

  • Multi-functions for smaller wire processing Model No.KW-MINIC-SSH suitable for one side crimping, another side twisting and tin dipping process.
  • Variable stripping length, adjustable with padded cutting blades for optimal accuracy.
  • With full touch screen display, operation and adjustment easily.
  • Wire twist is made possible by three rotary claws driven. Adjustable rotation speeds keep wire straight and neat.
  • Tin dipping angle & depth adjustable, provides even tin dipping in depths.
  • Tin oven temperature adjustable.
  • Serve Motor slide moving, exact orientation.

Functions

  • Measuring Cutting.
  • One side stripping.
  • Crimping on one end.
  • Crimping Tim Dipping process.
 MODEL KW-MINIC-SSH
 Capacity When 100mm, 3,600pcs/hr
 Wire Size Awg#34~#20
 Cutting length 30~9,999mm
 Cutting Accuracy ±1.0mm (When cutting length 300mm)
 Stripping length 1.3~6mm
 Press Capacity 1.5 Ton*1
 Control Mode Electronic, Electrical and Carns
 Twist Length 1.5mm~6mm
 Solder Yes
 Solder Pot. Heater 350W
 Detector - Out of terminal
- Terminal overload
- Mis-crimping Mis-stripping
- Low air pressure
- Hand gear / Automatic
- Wire pre-feeder Tin-oven temperature abnormal
- Out of stripping
- Out of wire
- Chief axis cover has not rejected yet
 Power Source One phase AC220V . 8A
 Compressed Air 0.5Mpa (5kgf/cm²) approx. 200ML/min (use clear dry air)
 Weight 420kgs
 Dimension-Weight 700mm(L)x845mm(W)x1335mm(H)



KW-MINIC-SSH

     

[ Page 1 ]  [ Page 2 ]  [ Page 3 ]
 

 Copyright 2003-2006 Kawa Machine Tools Sdn Bhd, Malaysia. All Rights Reserved. Designed by JustSimple